Skip to main content

Proteomics-based metabolic modeling and characterization of the cellulolytic bacterium Thermobifida fusca



Thermobifida fusca is a cellulolytic bacterium with potential to be used as a platform organism for sustainable industrial production of biofuels, pharmaceutical ingredients and other bioprocesses due to its capability of potential to convert plant biomass to value-added chemicals. To best develop T. fusca as a bioprocess organism, it is important to understand its native cellular processes. In the current study, we characterize the metabolic network of T. fusca through reconstruction of a genome-scale metabolic model and proteomics data. The overall goal of this study was to use multiple metabolic models generated by different methods and comparison to experimental data to gain a high-confidence understanding of the T. fusca metabolic network.


We report the generation of three versions of a metabolic model of Thermobifida fusca sp. XY developed using three different approaches (automated, semi-automated, and proteomics-derived). The model closest to in vivo growth was the proteomics-derived model that consists of 975 reactions involving 1382 metabolites and account for 316 EC numbers (296 genes). The model was optimized for biomass production with the optimal flux of 0.48 doublings per hour when grown on cellobiose with a substrate uptake rate of 0.25 mmole/h. In vivo activity of the DXP pathway for terpenoid biosynthesis was also confirmed using real-time PCR.


i Tfu296 provides a platform to understand and explore the metabolic capabilities of the actinomycete T. fusca for the potential use in bioprocess industries for the production of biofuel and pharmaceutical ingredients. By comparing different model reconstruction methods, the use of high-throughput proteomics data as a starting point proved to be the most accurate to in vivo growth.


With ongoing research in genomics, metagenomics, and bioprospecting, the breadth of novel and interesting biochemistry continues to grow. One of the current challenges associated with the large amount of data and resources available is to conduct detailed analyses to curate information to translate raw data into knowledge that provides functional insight. One computational method that facilitates metabolic analysis and dovetails well with genomic and biochemical information is genome-scale constraint-based modeling. While constraint-based models have benefits of being easily scalable and providing gene-protein-reaction level specificity, there are a number of limitations. One of the most fundamental problems revolves around the fact that metabolic networks are underdetermined and thus, there exist alternative flux states with different pathway usage that produce indistinguishable cellular phenotypes. This is an underlying problem with constraint-based models that impacts multiple facets of these models including the initial reconstruction (association of specific reactions with annotated genes) to producing simulation predictions (presence of alternate optimal solutions). In this study, we consider the metabolically under-characterized actinobacterium, Thermobifida fusca, and utilize three different methods to gain a better understanding of its metabolic network and identify preferred methodologies for network characterization.

Thermobifida fusca

Within the actinomycetes, Thermobifida fusca (aerobic, thermophilic, gram-positive) is known for its high temperature and pH stability as well as highly expressed cellulolytic system. The cellulolytic system is comprised of three endocellulases (Cel9B, Cel6A and Cel5A), two exocellulases (Cel6B and Cel48A) and a processive cellulase (Cel9A) [1]. Numerous studies in the past have reported on various facets of the ability of T. fusca to degrade lignocellulosic biomass. Due to the high efficiency with which T. fusca can process lignocellulosic materials, efforts have been made to clone several individual cellulase genes into Streptomyces lividians, Streptomyces albus, Bacillus subtilis[2] and Escherichia coli[3],[4]. The cloned enzymes were isolated in good concentrations but failed to show similar level of cellulolytic activity as is found in T. fusca. This may be due to the complexity of cellulose degradation systems that are not defined by a few genes but is an intertwined network of various enzymes [1],[5]. Hence, it is suggested that the best way to fully utilize the cellulolytic capabilities of T. fusca may be to develop T. fusca rather than trying to move its cellulases into other systems by heterologous expression.

Actinomycetes have historically been involved in the biological production of a variety of antifungals, antibiotics, and chemotherapeutics. Some of these compounds include siderophores [6], polyketides [7],[8] and terpenes [9],[10]. As a cellulolytic actinomycete, T. fusca may present an interesting opportunity for consolidated bioprocessing - CBP (Figure 1) of raw lignocellulosic material to value-added biobased products.

Figure 1

The prospective use of cellulolytic microbes such as T. fusca may help in reducing the multiple steps towards the fermentation bioprocess there by reducing the need of pretreatment of plant biomass to feed into an industrial process as a source of carbon. Bacteria-X denotes the cellulolytic capabilities of microbes such as T. fusca and Bacteria-Y denotes the fermentations potentials of industrial microbes

The ability to produce chemicals of industrial importance using inexpensive lignocellulosic biomass has been a recent focus for microbial systems. For T. fusca, the sequencing of its genome by Department of Energy (DOE) in 2005 sets up a milestone towards understanding this industrially applicable microbe [11]. Besides proving an excellent host microbe for biofuel production [12], it also showed success towards utilization of untreated (without any preprocessing) lignocellulosic material. This is a promising development toward making use of the cellulolytic capabilities of this microbe to reduce the complex multi-step bioprocess to a CBP [13].

Different approaches have been taken in the past in trying to develop a consolidated bioprocess. One approach is to utilize the cellulolytic capabilities to well-established model organisms, such as E. coli and S. cerevisiae[1]. This approach seeks to allow for direct use of lignocellulosic biomass as a starting point, but leverages the knowledge and tools available for well-characterized organisms. The alternative approach is to characterize and develop poorly-characterized cellulolytic organisms. Thus, high levels of cellulose processivity can be achieved, but the challenge is to develop the knowledge and tools to a sufficient level that metabolism can be designed and altered in a directed fashion.

In studying T. fusca, we believe that it can be developed into a facile cellulolytic system for consolidated bioprocessing. In 2011, Deng and Fong established a genetic modification protocol for genetic engineering of T. fusca and demonstrated this system through the production and optimization of propanol [12]. The initial developments in the characterization of T. fusca are listed in Table 1. Following along the same lines, we continue to further understand the other capabilities of robust cellulolytic system of actinomycete for use in manufacturing industries. Thus, our group aims to present a systems level understanding of metabolic network of T. fusca.

Table 1 Significant milestones for T. fusca research and characterization

Metabolic models

With the availability of genomic sequences, it has become possible to use genome annotation and biochemical information to reconstruct cellular metabolic networks [14]. These models can be used for simulating the living state of bacteria, if operated under the defined constraints and boundary conditions. There are various algorithms such as FBA - flux balance analysis [15],[16], MOMA - minimization of metabolic adjustments [17], ROOM - regulatory on-off minimization [18] and MCA - metabolic control analysis that are currently used for the purpose of running computational simulations of these models [19]. In the current study, we used FBA, which is based on linear programming, to simulate and optimize T. fusca model developed in this study for biomass production (growth).

T. fusca model and FBA

Whole genome sequence and annotation of T. fusca[11] was used to build a genome-scale metabolic reconstruction to understand the underlying metabolic pathways and network in T. fusca[11],[12],[20]. The reaction database used for drafting the model includes but is not limited to sources such as KEGG [21],[22], BiGG [23], rBioNet [24], UniProt [25] and MBRole [26]. Information from disparate databases were tabulated to form an in-house reaction database as illustrated in Figure 2.

Figure 2

Illustration of available database used for compiling the MetModel reaction database.

The process of compiling biochemical reactions leads to the formulation of a draft model of T. fusca, however, at this stage the represented metabolic network inevitably is incomplete and has numerous metabolic gaps. Thus, any initial model that is generated undergoes a gap-filling step. For our models, gap-filling was initially performed using a computational gap-filling algorithm [27]-[30]. After gap-filling, simulations can be run by specifying input constraints such as substrate uptake rate or oxygen uptake rate. Once the model provides a framework to understand the cellular process, it can be used to find target for focused metabolic engineering to yield products of biotechnological value [31]. The most widely-used algorithms for design and simulation of genome-scale constraint-based metabolic models such as OptKnock [32], OptForce [33], EMiLio [34] are based on flux distribution and flow through chemically balanced reactions (FBA). Flux balance analysis (FBA) uses linear programming to optimize the objective function as follows:

Maximize : Z Subject to : Sv = 0 , a i v i b i for all reactions i ,

where, Z is the flux through objective function (biomass production and product optimization), S: stoichiometry of the reactions represented as matrix, v is reaction flux vector, a i and b i are the constraints placed on the flux v i of the reaction i[35].

Even after compiling biochemical information and gap-filling a model, there often are discrepancies between the computational model results and in vivo states that are difficult to identify using only computational approaches. An additional level of model curation can be achieved by integrating high-throughput experimental data with the framework of a computational model to put “content in context” [35]. This data integration can be done using multi-scale high throughput experimental data such as transcriptomics, proteomics and metabolomics. This step reconciles in silico predictions with experimental results and thereby helps enhance the characterization of the cellular activity.

Genome-scale metabolic models have been created for many prokaryotic microbes and a variety of applications [23]. Several of these models have been able to incorporate experimental data to more closely match cellular processes. Once the model closely resembles a biological system, it can be optimized for defined objective function. This objective function may range from production of biomass to production of a chemical target. Following the in silico optimization of yields the computational design may eventually be replicated for applications in industry, therapeutics or health-related predictions.

In this study, three different approaches for generating constraint-based models were used and analyzed for their ability to accurately predict cellular growth when given an input substrate uptake rate. The three model versions were 1) designed using Model SEED [36], 2) an in-house semi-automated reconstruction based on organism specific annotation and reaction information from KEGG [21],[22], and 3) a proteomics-based model from 2D proteomic experiment of T. fusca grown on cellobiose media. A comparative analysis between the different models was conducted to develop the most experimentally accurate model of T. fusca and to provide comparison of different model generation methods. Detailed analysis of metabolic function of T. fusca is also included to provide perspective on potential industrial applications (eg: in biofuel and natural product) for development of consolidated bioprocesses using T. fusca. Here we will be discussing the mevalonate and non-mevalonate pathways for terpenoid biosynthesis. These pathways are utilized for the production of isoprenoid precursor (isopentenyl pyrophosphate and dimethylalyl pyrophosphate) compounds that have applications in pharmaceutical, nutraceutical and perfume industries.

Results and discussion

T. fusca is known to directly use lignocellulosic biomass as a carbon substrate due to its well-studied cellulolytic system [1],[37]. In laboratory conditions, T. fusca can grow on a variety of substrates including glucose, cellobiose, and microcrystalline cellulose. To match experimental work conducted as part of this study on cellobiose, it was necessary to add cellobiose degradation reactions to the draft model based upon the annotation and experimental evidence (EC, Tfu_0937). Three versions of a T. fusca model were created, as shown in Figure 3, using three different approaches to compare model-building approaches and models were tested against experimental growth on cellobiose. In the process of model reconstruction, activity of terpenoid pathways was uncertain, but was experimentally verified using real-time PCR.

Figure 3

Flowchart of the model building step and data incorporation for all the three version of the model. Genomics and Proteomics are the high throughput datasets used for building the models. SUR – Substrate uptake rate for cellobiose as calculated experimentally was applied as a constraint. Red indicated no solution was obtained when running simulation of SEED model under experimental constraints. Values in the green boxes indicate the growth rates for Tvu_v2 and Tfu_v3.

Metabolic reconstruction: summary and model statistics

Three different draft metabolic models were constructed for Thermobifida fusca. The three models varied based upon what was used as the starting point for generating the initial reaction list for the model (Model SEED, KEGG, proteomics data). In all cases, after initial generation of a reaction list, all reactions were associated with KEGG IDs to standardize comparisons between models.

Tfu_v1: The taxonomy number of T. fusca was used to generate a draft model from Model SEED (Tfu_v1) [36],[38]. The Model SEED output was then converted to KEGG compound identifiers before running gap analysis and FBA. The Model SEED-derived Tfu_v1 model contained 1302 reactions, 1213 metabolites, and 618 EC numbers. Gap analysis added 146 reactions that primarily include a variety of exchange reactions (reactions that denote the direct uptake/secretion of the respective metabolite from or to the extra cellular media). When used with unconstrained carbon input flux (cellobiose uptake of 1000 mmoles/gDW/h) the Tfu_v1 model calculated a growth rate of 24.25 doublings/h. However, when the experimentally determined substrate uptake rate of cellobiose (0.25 mmoles/gDW/h) was applied to this model it failed to arrive at a viable solution (warning of infeasible solution). This infeasibility was crosschecked and verified by using the Model SEED FBA runs. The model failed to perform under any media formulations (glucose and cellobiose) attempted using the Model SEED simulation platform.

Tfu_v2: The second version of a T. fusca model (Tfu_v2) was created using an in-house semi-automated reconstruction method as defined in our past publications [27],[28]. This model consists of 1002 reactions involving 584 EC numbers and accounting for 1105 metabolites. Eight out of 48 reactions added in the gap analysis were non-exchange reactions. Applying the experimentally determined constraint of substrate uptake rate for cellobiose as 0.25 mmoles/gDW/h, the optimal biomass growth was 72.84 doublings/h. This growth rate was compared to experimental growth rate of 0.43 doublings/h.

Tfu_v3: The third version of the model generated in this study (Tfu_v3) is based on proteomic experimental data generated by our group in collaboration with the Manitoba Centre for Proteomics & Systems Biology, the University of Manitoba. The detailed protein characterization of T. fusca based on this data is beyond the scope of this paper and will be explained in future publications along with the other experimental data. This method of generating a model varied from Tfu_v1 and Tfu_v2 as the initial reaction list was populated from reactions associated with experimentally detected proteins, not informatics-based annotation. The Tfu_v3 model contains 975 reactions, 1382 metabolites, and 316 EC numbers (296 unique genes annotated in T. fusca). FBA simulations with an input constraint of a cellobiose uptake rate of 0.25 mmoles/gDW/h gave a predicted growth rate of 0.49 doublings/h (for reference experimentally determined growth rate is 0.43 doublings/h). A comparison of the model contents (by reaction) is summarized in Figure 4 and the detailed model in all three versions is attached as Additional file 1 (Model.xls).

Figure 4

Summary of three versions of models created in this study: Reaction distribution across the 3 versions is represented in the figure. All three versions had 170 reactions in common. Following was the common reaction across each compared pair of model versions: Tfu_v1: SEED AND Tfu_v2:yaml: 195, Tfu_v2:yaml AND Tfu_v3: Proteomics: 417, Tfu_v1: SEED AND Tfu_v3: Proteomics: 185.

Due to the critical role of central metabolism to heterotrophic organisms, an analysis was conducted using all three model versions to study central metabolism. To study the individual pathways in carbohydrate metabolism and amino acid metabolism, each metabolic pathway was annotated using EC numbers recorded in KEGG. The summary table is shown in Table 2. Genes within a pathway were tabulated to evaluate the completeness of given pathway. At the first glance, all the pathways with a gene presence of 20% or above were counted as present/active.

Table 2 Summary of individual pathway contrasts between three versions of model: The reference frames selected here is KEGG

Tfu_v3: proteomics model reaction distribution

Based upon the initial model contents and growth rate simulation results, the the Tfu_v3 appears to most closely predict experimental results. Thus, further detailed computational analyses of T. fusca are based on the Tfu_v3 model. The Tfu_v3 model is designated as iTfu296 (represents 296 annotated genes).

The proteomics-based model of T. fusca accounts for 216 amino acid reactions and 182 carbohydrate-related reactions as illustrated in Figure 5. When running an FBA simulation to maximize growth with an input cellobiose uptake of 0.25 mmoles/gDW/h, 110 reactions were highly active as indicated by high calculated fluxes (flux values of >100 or < −100). (The range of flux through reactions was from 0 to 1000; with a threshold of 100 arbitrarilty selected for the purpose of analysis). Among these 110 reactions, the majority of the reactions were used in carbohydrate (37) and amino acid (34) metabolism (i.e. 60 unique reactions after eliminating overlaps between carbohydrates (37) and amino acid (34)).

Figure 5

Major reaction distribution in the proteomics based model comprising total of 1002 reactions.

In carbohydrate metabolism, the tricarboxylic acid cycle (TCA cycle) was complete and active. In the current study, we will be focusing on the seven compounds of TCA cycle that play crucial roles in carbon exchange between various pathways in the central metabolism. These intermediates include: pyruvate (KEGG compound C00022), acetoacetyl CoA (C00332), acetylyl CoA (C00024), alpha-ketoglutarate (C00026), succinyl CoA (C00091), fumarate (C00122) and oxaloacetate (C00036). Studying the reaction use and fluxes involving these compounds will help us understand the probable activity in amino acid biosynthesis and degradation pathways. To summarize these nodes in the current proteomics-based version of our model, 60 unique reactions (associated with carbohydrates and amino acid metabolism) were found with some significant flux (i.e. flux was > 0.01 units). Among these, 23 unique reactions correspond to amino acid metabolism. This indicates the activity around the most of the amino acid – carbohydrate connection nodes as shown in Figure 6.

Figure 6

Summary of carbohydrate and amino acids connection nodes and number of active flux reaction within amino acid pathways. Standard three-letter amino acids code is used to denote the pathway names. The carbohydrate nodes of the central metabolism are highlighted as red and the branching out amino acid pathways are boxed in blue. The purple boxes denote the fatty acids connections from Acetyl Co A and Acetoacetyl Co A. The numbers of reactions for each pathway are represented in the parenthesis.

It was observed that in the carbohydrate-amino acid network connection the majority of reactions (11 out of 23) branch in and out of alpha – ketoglutarate. The acetyl CoA node was more centralized by connecting the amino acids and fatty acid pathways with 8 significantly high flux reactions. The pathway specific details are also illustrated in the Table 2. It was observed that when contrasted with the reactions specific to the biosynthesis or degradation of amino acids, the overall analysis suggests the presence of all but one amino acid subsystem, cysteine and methionine metabolism.

Comparison of “model refinement with data” Vs “reconstruction from data”

In the past, several attempts have been made to use computational metabolic models as a scaffold for experimental data integration [39]-[42]. Experimental data integration not only serves as a means of testing model predictions, but can also be used to help refine the model solution space to provide simulations that more closely match in vivo flux states. In this study, we used two methods to combine metabolic models and experimental data to understand and characterize the metabolic network of T. fusca. For the first approach, an MILP algorithm (analogous to Shlomi et al. [42]) was used to integrate the proteomics dataset to the model Tfu_v2 (autobuild model). This algorithm aims at optimizing the agreement between the experimental data and the in silico model [42]. In this context, the experimental information is used to assign a present or absent call to re-channelize the flux distribution of the network as explained by Gowen et al. [43].

Parallel to this, a second approach originating directly from an experimental proteomic data set was used to generate an independent model, Tfu_v3. Currently existing methods for constraint-based model reconstruction primarily depend on the bioinformatic information such as genomics data, biochemical data and models of related microorganisms at the initial phase of model building. The approach taken for construction of Tfu_v3 relies on the in vivo experimental evidence of the proteins as the starting point of model building. While these two methods of model construction used the same bioinformatics and experimental data, subtle differences in the order of process steps and algorithms, as shown in Figure 5, used to construct the two models resulted in vastly different functional consequences.

Besides this, another very interesting and significant difference between Tfu_v2 and Tfu_v3 was observed in the function of the TCA cycle. The reaction using pyruvate to make oxaloacetate was not found in the autobuilt Tfu_v2 version whereas the proteomics version clearly shows its presence (EC, Gene ID: Tfu_2557, Tfu_1530, Tfu_0947, Tfu_1228). In addition, most of the amino acid pathways were fully or partially incomplete in Tfu_v2. Thus, the Tfu_v2 model had artificially high fluxes through transport reactions to uptake external nutrients to satisfy simulation requirements for optimal biomass production. The Tfu_v3 model showed most of the pathways significantly complete except cysteine and methionine metabolism. Besides cysteine and methionine metabolism, phenylalanine metabolism was sparsely populated, but active flux through the reaction involved in the interconversion of phenylalanine to phenylpyruvate suggested making a present call for the entire phenylalanine pathway. These functional differences indicate some of the potential danger associated with over-reliance on genome annotation (that may contain numerous errors especially in under-characterized organisms).

Applicability of the model: biofuels and pharmaceutical precursors

The subsystem-based analysis of central metabolism and experimental foundation suggests the closer association of Tfu_v3 to the in vivo biochemical system of T. fusca. While the Tfu_v3 model is the most accurate of the three models constructed in this study, there are numerous areas of metabolism that are not well-characterized. For comparison, even the most update model of E. coli has an account of only for 30% of the gene products in the model [44]. Likewise, this model being the first ever T. fusca metabolic network also opens huge scope of pathway-focused review and improvement. Once completely functional these models provide a ground for hypothesizing a target for the further study.

T. fusca is a potentially interesting organism for biochemical production of sustainable fuels or industrial chemicals. In these areas, two pathways of particular interest are butanol and secondary metabolite biosynthesis (e.g. terpenoids). The Tfu_v2 (ModelSEED autobuilt) model incorporates most of the reactions present in the butanoate metabolism however, no active flux was observed through most of them. Tfu_v3 based on experimental dataset confirms approximately 50% of these reactions but also predicts no active flux through these pathways. Thus, while production of butanol through butanoate metabolism appears possible in terms of biochemical capabilities, it remains to be explored and demonstrated experimentally. For comparison purposes, in 2011 a mutant strain T. fusca B6 was designed and constructed with heterologous expression of a bifunctional alcohol dehydrogenase (adhE2) for production of 1-propanol [12]. Engineered production of 1-propanol in T. fusca provides first-step experimental evidence that T. fusca may be usable for the production of fuels directly from lignocellulosic raw materials.

One consideration for FBA simulations of both butanol/butanoate and terpenoids is that these are secondary pathways and utilization of these pathways are not explicitly included in the biomass objective for growth maximization simulations. Thus, it is not necessarily surprising that growth simulations with no genetic designs incorporated may not show flux through secondary pathways. However, due to the potential for secondary metabolism in actinomycetes, we considered studying the terpenoid backbone (TBB) pathway in more detail.

With the aim of characterization, 16 reactions for the TBB pathway were added to the model to computationally test the feasibility of flux through the TBB pathway when optimizing for the biomass production. All the reactions of the mevalonate pathway except R001123 had an active flux of approximately 0.53 mmoles/gDW/h. The reaction R01123 was responsible for isomerization reaction between isopentenyl diphosphate (IPP or C00129) and dimethylallyl pyrophosphate (DMAPP or C00235). The positive flux through the reaction (R01121) lead to the formation of IPP, as shown in Figure 7, and provided computational support that T. fusca may possess the capability to divert the flux through the mevalonate pathway reactions. This data was used as a clue to conduct follow-up experiments to verify the active in vivo expression of these pathways.

Figure 7

TBB as from flux analysis through Mevalonate Pathway (left) and expression analysis of Non mevalonate pathway (right).

Experimental validation: expression analysis TBB pathway genes

Different bacteria have been found to produce terpenoids by either the mevalonate pathway or the non-mevalonate pathway (DXP pathway). While computational simulations demonstrated the feasibility of an active mevalonate pathway, no clear evidence existed for either the mevalonate or the DXP pathways. Given the shorter length of the DXP pathway, initial experimental testing focused on the seven genes of the DXP pathway (Figure 8).

Figure 8

TBB through the non-mevalonate pathway and gene annotation in T. fusca.

Real-time PCR was used to measure mRNA transcript levels for the genes in the DXP pathway. The details of T. fusca genes studied and tested are listed in Table 3 along with their relative expression in Figure 9. All but one of the required genes were found to be expressed in the strain. The missing enzyme was 2-C-methyl-D-erythritol 4-phosphate cytidylyltransferase (EC: This suggests the presence of terpenoid backbone biosynthesis via the DXP pathway in T. fusca.

Table 3 T. fusca genes associated with the DXP pathway for terpenoid biosynthesis
Figure 9

Relative expression of terpenoid biosynthetic genes associated with the DXP pathway in T. fusca. Tfu_2950 is a housekeeping gene with constitutive expression in T. fusca.


Three different methodologies were applied to create metabolic reconstructions for T. fusca . The proteomics-based model (Tfu_v3) named i Tfu296 was found to mimic the biological growth conditions most closely. It was observed that when cellobiose uptake rate was constraint as 0.25 mmoles/gDW/h gave the growth rate of 0.49 doublings/h. This was comparable to the experimental growth rate of 0.43 doublings/h. This model was built using a novel scheme for model reconstruction based on high throughput proteomic data at the initial model building phase.

Genomic datasets are the most standard high throughput data currently available, but it is always a concern to what extent the genomics information is really transcribed and translated into the functional role inside the cell. Out of 3195 genes annotated in the T. fusca genome published in 2005, only 3117 translated into protein-coding genes and only 1757 were associated with predicted functions [11],[45]. This discrepancy between genomic and proteomic information may be due to environmental or evolutionary selection processes. Accurate proteomic data provides more information about the functional activities of the cell, as confirmed by the fact that our proteomics-based model agreed with experimental observations better than models built based on genomic information alone.

With the advent of standard genomics information, genome-scale metabolic models have become a widely used approach to gain a systems level understanding of metabolic processes and function [31]. Every organism-specific model that is built needs to pass through multiple levels of curation and validation based on genome annotation, experimental evidence and (or) biochemical literature study. Knowing that omics-data can be used to help identify in vivo function, we applied an approach model building based on high throughput proteomic data. These models contain the scope of integration of genomics, transcriptomics, proteomics, metabolomics and phenomics data. For the current study, proteomics data has been used to establish a significantly reliable starting point for the metabolic model reconstruction. This version of model Tfu_v3 is based on functional building blocks that are more closely associated with the phenotypic characteristics when compared to genomics data in the hierarchy.

In a larger context, the modeling approach aims at establishing links between the molecular and cellular functions. However, it is still hard to find complete agreement between the “biology - biochemistry” and “network models - omics data”. It is reported that the most updated E. coli[44] model only associates to 30% of gene products in the model and 1/3 of the gene products are not functionally annotated [46]. Even with this limitation, model-based systems analysis can be useful for developing hypothesis and target for the focused study. In this case, we hypothesize the presence of an active terpenoid backbone pathway, which will be the focus of our follow up studies using experimental and analytical methods.

Nevertheless, this promising approach suffers with a major limitation to date – a lack of a standardized reaction database to build and analyze metabolic network. Due to inconsistency in the labeling of the metabolites (eg: citrate is almost chemically equivalent to citric acid; 2-hydroxy-1,2,3-propanetricarboxylic acid; 2-hydroxytricarballylic acid and have the same compound identifier on KEGG) it is difficult to assemble a non-redundant reaction database with standard nomenclature. Current systems biology experts are in the quest of cleaning and populating available database with minimal redundancy in the hope of exhaustive coverage of cellular biochemical reactions. Some of the examples are MetRxn and MetaCyc.

Computational analysis demonstrated the theoretical feasibility of producing terpenoids in T. fusca, however, no existing experimental evidence had previously supported or demonstrated this capability. Analysis of mRNA transcripts showed in vivo activity of the DXP pathway in T. fusca providing evidence that T. fusca may be capable of direct cellulose-to-terpenoid biosynthesis. Isoprene is the monomeric unit for the huge family of terpenoids, thus hold importance in pharmaceutical industry, perfumes, incense, flavoring, spices, and varnishes.

T. fusca was found to be a biofuel producing strain after the genetic modification protocol for this strain was established by Deng & Fong. With this systems level characterization of secondary metabolites, it can be suggested as a highly useful, robust and inexpensive strain for industrial application. However, this opens an arena for the scale up and optimization study to successfully launch this strain in industrially significant microbes.


Culture conditions

Thermobifida fusca ATCC BAA-629 was grown in Hagerdahl medium containing 1.0% cellobiose. Experiments were conducted in Erlenmeyer flasks where 50 mL pre-cultures of T. fusca YX were grown at 55°C and 250 rpm for 24 hours in a 500 mL Erlenmeyer flask. Growth cultures for testing were inoculated using 5% of the pre-culture and grown at 55°C and 250 rpm for 42–48 hours.

Metabolic network reconstruction

Overall model construction steps illustrated in Figure 3 are as follows:

Tfu_v1: SEED. The autobuilt draft model was made in Model SEED [36],[38] and used as the draft network. The *.xml file downloaded was converted into in-house MetModel format to run the FBA simulations with MetModel software.

Tfu_v2: yaml. The *.yaml autobuilt drafts were created by our group in 2008 using the then available organism specific annotations and reaction database from KEGG. [27],[29],[43].

Tfu_v3: Proteomics. The draft model was constructed using the output of a 2-dimensional LC-MS analysis performed at the Manitoba Centre for Proteomics & Systems Biology (University of Manitoba, Winnipeg, Canada). Cellobiose grown T. fusca sample was subjected to FASP lysis/digestion procedure (J.R. Wisnewski et al. Nature Methods 2009. 6(5). 359–362) followed by 2D-HPLC-MS/MS acquisition using TripleTOF 5600 mass spectrometer (ABSciex, Mississauga, ON) [47]. Thirteen pairwise-concatenated fractions in the first dimension were analyzed over a 1-hour HPLC-MS/MS session, each. This collection yielded 276,129 MS/MS spectra that were interrogated using an in-house GPU-based search engine [48] and yielded identification of 126,471 peptides (16,598 non-redundant) spanning 2101 proteins. This represents approximately 68% total proteomic coverage. Protein identification expectation values were computed using a Bayes’ theorem application of its member peptide expectation values, following the design by Beavis and Fenyo for X!tandem [49]. Over 1700 proteins have expectation values of log(e) < −10 (a one in ten-billion probability of random miss-assignment).

Open source T. fusca (Taxon identifier: 269800) database KEGG [21],[22], IMG [45] and UniProt [25] was used to map the gene identifiers to the EC numbers which was then looked up as the search identifier in the reaction database compiled in-house. Further, manual curation was done using the published biochemical literature specifically for cellobiose utilization as explained in Figure 10.

Figure 10

Cellulose degradation reaction in presence of water: The reaction to convert cellobiose as per the experimental dataset Tfu_0937, EC was expressed and thus the associated reaction was added to the model.

Linear programming for flux balance analysis

In-house python scripts were used to run the FBA simulations using the linear programming algorithm as shown in the introduction.

Objective function: biomass equation

This draft model aims at the growth optimization and the best estimates used in metabolic modeling scenario are biomass equation, which was designed by slightly manipulating the biomass equations from closely related species and available published information about T. fusca growth conditions [50]. The box below shows the biomass equation used for the simulation of all the version of the model. The details of the compounds identifiers are listed in the Additional file 2.

BIOMASS EQUATION 34.7964805 C 00001 + 40.1701382 C 00002 + 0.00780937 C 00003 + 0.00780937 C 00006 + 0.00780937 C 00010 + 0.00780937 C 00016 + 0.00780937 C 00018 + 0.00780937 C 00019 + 0.25601316 C 00025 + 0.00780937 C 00034 + 0.59580299 C 00037 + 0.00780937 C 00038 + 0.50005823 C 00041 + 0.20910125 C 00044 + 0.33354560 C 00047 + 0.23467873 C 00049 + 0.00780931 C 00059 + 0.28827498 C 00062 + 0.12987656 C 00063 + 0.25601316 C 00064 + 0.20970184 C 00716 + 0.00780937 C 00070 + 0.14934101 C 00073 + 0.14026667 C 00075 + 0.00780937 C 00076 + 0.05515731 C 00078 + 0.18056213 C 00079 + 0.13425080 C 00082 + 0.08898018 C 00097 + 0.00780937 C 00698 + 0.43865670 C 00123 + 0.01174687 C 00131 + 0.09262265 C 00135 + 0.21542571 C 00148 + 0.23467873 C 00152 + 0.00780937 C 00175 + 0.41159840 C 00183 + 0.24664683 C 00188 + 0.00780937 C 00238 + 0.00780937 C 00255 + 0.01174687 C 00286 + 0.00780937 C 00305 + 0.28255111 C 00407 + 0.01174687 C 00458 + 0.01174687 C 00459 + 0.09247649 C 04574 + 0.00780937 C 14818 + 0.00780937 C 14819 + 0.00780937 C 00229 > 40.0000000 C 00008 + 39.9921906 C 00009 + 0.60239528 C 00013 + 40.0000000 C 00080 + 0.00780937 C 03688

Gap analysis and model comparison

The draft model consists of the list of reactions however there are patches in the network that obstruct continuous flow of flux through the pathway. These links are filled in by using the reaction databank and suggesting the list of reactions required to complete the network. FBA-GAP is used to suggest the connection nodes/reactions that are missing [30]. The use and application of this framework have been described in past by Roberts et al., Gowen et al. and Vanee et al. [27],[29],[43]. FBA-GAP takes a draft model and biomass reaction and uses distances in the reaction network and mathematical optimization to produce a list of metabolites that are necessary for biomass production but cannot be produced or consumed by the cell. Reactions producing and consuming this list of metabolites are obtained from a reference database. These potentially gap-filling reactions were manually checked for relevant evidence such as associated proteins/enzymes characterized or genome annotations,. On detecting the specific evidence these reaction additions to the model wer accepted. The process is repeated until a positive biomass flux value is obtained. In this way, only high-confidence reactions are used to complete the reconstruction.

Data integrations and model validation for Tfu_v2

The mixed integer linear programming algorithm (MILP) published in 2008 by Shlomi et al. [42] was used for integration of proteomics data to the Tfu_v2 version of model. This algorithm was re-written in python by Gowen et al. [43] to include in our MetModel package.

Characterization of TBB pathway

Metabolic model i Tfu296 or (Tfu_v3) was used to enlist the already existing secondary metabolites production pathway based reactions (characterized by EC numbers) and metabolites (characterized by KEGG compound IDs). In addition, besides studying the complete secondary metabolite network a focused study on terpenoids backbone biosynthesis (TBB) pathway using mevalonate and non-mevalonate pathway was performed using KEGG (map00900). The reactions database of these pathways was created using the information from KEGG as shown in the Table 4 below.

Table 4 Reactions associated with Terpenoids backbone biosynthesis pathway that were added to the model Tfu_v3 for the simulation of Secondary metabolites pathway central hub

Expression analysis of TBB pathway genes

T. fusca strain YX grown on Cellobiose media to till the early log phase with dry cell weight of 2.005 mg/mL was used for isolation of RNA using the Qiagen RNA Protect and Qiagen RNAeasy kit. The total RNA was sent to Nucleic Acid Research Facility (Virginia Commonwealth University) for RT-PCR. Tfu_2950 was selected as housekeeping gene to measure the relative expression levels.

Additional files


  1. 1.

    Wilson DB: Studies of Thermobifida fusca plant cell wall degrading enzymes. Chem Rec. 2004, 4: 72-82. 10.1002/tcr.20002.

    Article  CAS  PubMed  Google Scholar 

  2. 2.

    Ghangas GS, Wilson DB: Cloning of the thermomonospora fusca endoglucanase E2 Gene in streptomyces lividans: affinity purification and functional domains of the cloned gene product. Appl Environ Microbiol. 1988, 54: 2521-2526.

    PubMed Central  CAS  PubMed  Google Scholar 

  3. 3.

    Irwin DC, Zhang S, Wilson DB: Cloning, expression and characterization of a family 48 exocellulase, Cel48A, from Thermobifida fusca. Eur J Biochem. 2000, 267: 4988-4997. 10.1046/j.1432-1327.2000.01546.x.

    Article  CAS  PubMed  Google Scholar 

  4. 4.

    Spiridonov NA, Wilson DB: Regulation of biosynthesis of individual cellulases in Thermomonospora fusca. J Bacteriol. 1998, 180: 3529-3532.

    PubMed Central  CAS  PubMed  Google Scholar 

  5. 5.

    Kukolya J, Nagy I, Laday M, Toth E, Oravecz O, Marialigeti K, Hornok L: Thermobifida cellulolytica sp. nov., a novel lignocellulose-decomposing actinomycete. Int J Syst Evol Microbiol. 2002, 52: 1193-1199. 10.1099/ijs.0.01925-0.

    CAS  PubMed  Google Scholar 

  6. 6.

    Lee J, Postmaster A, Soon HP, Keast D, Carson KC: Siderophore production by actinomycetes isolates from two soil sites in Western Australia. Biometals. 2012, 25: 285-296. 10.1007/s10534-011-9503-9.

    Article  CAS  PubMed  Google Scholar 

  7. 7.

    Takahashi S, Toyoda A, Sekiyama Y, Takagi H, Nogawa T, Uramoto M, Suzuki R, Koshino H, Kumano T, Panthee S, Dairi T, Ishikawa J, Ikeda H, Sakaki Y, Osada H: Reveromycin A biosynthesis uses RevG and RevJ for stereospecific spiroacetal formation. Nat Chem Biol. 2011, 7: 461-468. 10.1038/nchembio.583.

    Article  CAS  PubMed  Google Scholar 

  8. 8.

    Niraula NP, Kim SH, Sohng JK, Kim ES: Biotechnological doxorubicin production: pathway and regulation engineering of strains for enhanced production. Appl Microbiol Biotechnol. 2010, 87: 1187-1194. 10.1007/s00253-010-2675-3.

    Article  CAS  PubMed  Google Scholar 

  9. 9.

    Cane DE, Ikeda H: Exploration and mining of the bacterial terpenome. Acc Chem Res. 2012, 45: 463-472. 10.1021/ar200198d.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  10. 10.

    Citron CA, Gleitzmann J, Laurenzano G, Pukall R, Dickschat JS: Terpenoids are widespread in actinomycetes: a correlation of secondary metabolism and genome data. Chembiochem. 2012, 13: 202-214. 10.1002/cbic.201100641.

    Article  CAS  PubMed  Google Scholar 

  11. 11.

    Lykidis A, Mavromatis K, Ivanova N, Anderson I, Land M, DiBartolo G, Martinez M, Lapidus A, Lucas S, Copeland A, Richardson P, Wilson DB, Kyrpides N: Genome sequence and analysis of the soil cellulolytic actinomycete Thermobifida fusca YX. J Bacteriol. 2007, 189: 2477-2486. 10.1128/JB.01899-06.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  12. 12.

    Deng Y, Fong SS: Metabolic engineering of Thermobifida fusca for direct aerobic bioconversion of untreated lignocellulosic biomass to 1-propanol. Metab Eng. 2011, 13: 570-577. 10.1016/j.ymben.2011.06.007.

    Article  CAS  PubMed  Google Scholar 

  13. 13.

    Carere CR, Sparling R, Cicek N, Levin DB: Third generation biofuels via direct cellulose fermentation. Int J Mol Sci. 2008, 9: 1342-1360. 10.3390/ijms9071342.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  14. 14.

    Edwards JS, Covert M, Palsson B: Metabolic modelling of microbes: the flux-balance approach. Environ Microbiol. 2002, 4: 133-140. 10.1046/j.1462-2920.2002.00282.x.

    Article  PubMed  Google Scholar 

  15. 15.

    Orth JD, Thiele I, Palsson BO: What is flux balance analysis?. Nat Biotechnol. 2010, 28: 245-248. 10.1038/nbt.1614.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  16. 16.

    Varma A, Palsson BO: Metabolic flux balancing: basic concepts, scientific and practical use. Nat Biotechnol. 1994, 12: 994-998. 10.1038/nbt1094-994.

    Article  CAS  Google Scholar 

  17. 17.

    Segre D, Vitkup D, Church GM: Analysis of optimality in natural and perturbed metabolic networks. Proc Natl Acad Sci U S A. 2002, 99: 15112-15117. 10.1073/pnas.232349399.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  18. 18.

    Shlomi T, Berkman O, Ruppin E: Regulatory on/off minimization of metabolic flux changes after genetic perturbations. Proc Natl Acad Sci U S A. 2005, 102: 7695-7700. 10.1073/pnas.0406346102.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  19. 19.

    Rapoport TA, Heinrich R, Jacobasch G, Rapoport S: A linear steady-state treatment of enzymatic chains. A mathematical model of glycolysis of human erythrocytes. Eur J Biochem. 1974, 42: 107-120. 10.1111/j.1432-1033.1974.tb03320.x.

    Article  CAS  PubMed  Google Scholar 

  20. 20.

    Durot M, Bourguignon P-Y, Schachter V: Genome-scale models of bacterial metabolism: reconstruction and applications. FEMS Microbiol Rev. 2009, 33: 164-190. 10.1111/j.1574-6976.2008.00146.x.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  21. 21.

    Kanehisa M, Goto S: KEGG: kyoto encyclopedia of genes and genomes. Nucleic Acids Res. 2000, 28: 27-30. 10.1093/nar/28.1.27.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  22. 22.

    Kanehisa M, Goto S, Hattori M, Aoki-Kinoshita KF, Itoh M, Kawashima S, Katayama T, Araki M, Hirakawa M: From genomics to chemical genomics: new developments in KEGG. Nucleic Acids Res. 2006, 34: D354-D357. 10.1093/nar/gkj102.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  23. 23.

    Schellenberger J, Park JO, Conrad TC, Palsson BØ: BiGG: a Biochemical Genetic and Genomic knowledgebase of large scale metabolic reconstructions. BMC Bioinformatics. 2010, 11: 213-10.1186/1471-2105-11-213.

    PubMed Central  Article  PubMed  Google Scholar 

  24. 24.

    Thorleifsson SG, Thiele I: rBioNet: A COBRA toolbox extension for reconstructing high-quality biochemical networks. Bioinformatics. 2011, 27: 2009-2010. 10.1093/bioinformatics/btr308.

    Article  CAS  PubMed  Google Scholar 

  25. 25.

    UniProt C: Update on activities at the Universal Protein Resource (UniProt) in 2013. Nucleic Acids Res. 2013, 41: D43-D47. 10.1093/nar/gks1068.

    Article  Google Scholar 

  26. 26.

    Chagoyen M, Pazos F: MBRole: enrichment analysis of metabolomic data. Bioinformatics. 2011, 27: 730-731. 10.1093/bioinformatics/btr001.

    Article  CAS  PubMed  Google Scholar 

  27. 27.

    Roberts SB, Gowen CM, Brooks JP, Fong SS: Genome-scale metabolic analysis of Clostridium thermocellum for bioethanol production.BMC Syst Biol 2010, 4:31-0509-0504-0531.,

  28. 28.

    Roberts SB, Robichaux JL, Chavali AK, Manque PA, Lee V, Lara AM, Papin JA, Buck GA: Proteomic and network analysis characterize stage-specific metabolism in Trypanosoma cruzi.BMC Syst Biol 2009, 3:52-0509-0503-0552.,

  29. 29.

    Vanee N, Roberts SB, Fong SS, Manque P, Buck GA: A genome-scale metabolic model of Cryptosporidium hominis. Chem Biodivers. 2010, 7: 1026-1039. 10.1002/cbdv.200900323.

    Article  CAS  PubMed  Google Scholar 

  30. 30.

    Brooks JP, Burns WP, Fong SS, Gowen CM, Roberts SB: Gap detection for genome-scale constraint-based models. Adv Bioinformatics. 2012, 2012: 323472-10.1155/2012/323472.

    PubMed Central  Article  PubMed  Google Scholar 

  31. 31.

    Joyce AR, Palsson BÃ: Toward Whole Cell Modeling And Simulation: Comprehensive Functional Genomics Through The Constraint-Based Approach. Prog Drug Res. 2007, 64: 267-309.

    Google Scholar 

  32. 32.

    Burgard AP, Pharkya P, Maranas CD: Optknock: a bilevel programming framework for identifying gene knockout strategies for microbial strain optimization. Biotechnol Bioeng. 2003, 84: 647-657. 10.1002/bit.10803.

    Article  CAS  PubMed  Google Scholar 

  33. 33.

    Ranganathan S, Suthers PF, Maranas CD: OptForce: an optimization procedure for identifying all genetic manipulations leading to targeted overproductions. PLoS Comput Biol. 2010, 6: e1000744-10.1371/journal.pcbi.1000744.

    PubMed Central  Article  PubMed  Google Scholar 

  34. 34.

    Yang L, Cluett WR, Mahadevan R: EMILiO: a fast algorithm for genome-scale strain design. Metab Eng. 2011, 13: 272-281. 10.1016/j.ymben.2011.03.002.

    Article  CAS  PubMed  Google Scholar 

  35. 35.

    Palsson BÃ: Systems Biology: Properties Of Reconstructed Networks. 2007, Cambridge University Press, New York

    Google Scholar 

  36. 36.

    Overbeek R, Begley T, Butler RM, Choudhuri JV, Chuang HY, Cohoon M, de Crecy-Lagard V, Diaz N, Disz T, Edwards R, Fonstein M, Frank ED, Gerdes S, Glass EM, Goesmann A, Hanson A, Iwata-Reuyl D, Jensen R, Jamshidi N, Krause L, Kubal M, Larsen N, Linke B, McHardy AC, Meyer F, Neuweger H, Olsen G, Olson R, Osterman A, Portnoy V: The subsystems approach to genome annotation and its use in the project to annotate 1000 genomes. Nucleic Acids Res. 2005, 33: 5691-5702. 10.1093/nar/gki866.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  37. 37.

    Wilson DB, Kostylev M: Cellulase processivity. Meth Mol Biol. 2012, 908: 93-99.

    CAS  Google Scholar 

  38. 38.

    Henry CS, DeJongh M, Best AA, Frybarger PM, Linsay B, Stevens RL: High-throughput generation, optimization and analysis of genome-scale metabolic models. Nat Biotechnol. 2010, 28: 977-982. 10.1038/nbt.1672.

    Article  CAS  PubMed  Google Scholar 

  39. 39.

    Chandrasekaran S, Price ND: Probabilistic integrative modeling of genome-scale metabolic and regulatory networks in Escherichia coli and Mycobacterium tuberculosis. Proc Natl Acad Sci U S A. 2010, 107: 17845-17850. 10.1073/pnas.1005139107.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  40. 40.

    Colijn C, Brandes A, Zucker J, Lun DS, Weiner B, Farhat MR, Cheng TY, Moody DB, Murray M, Galagan JE: Interpreting expression data with metabolic flux models: predicting Mycobacterium tuberculosis mycolic acid production. PLoS Comput Biol. 2009, 5: e1000489-10.1371/journal.pcbi.1000489.

    PubMed Central  Article  PubMed  Google Scholar 

  41. 41.

    Lerman JA, Hyduke DR, Latif H, Portnoy VA, Lewis NE, Orth JD, Schrimpe-Rutledge AC, Smith RD, Adkins JN, Zengler K, Palsson BO: In silico method for modelling metabolism and gene product expression at genome scale. Nat Commun. 2012, 3: 929-10.1038/ncomms1928.

    Article  PubMed  Google Scholar 

  42. 42.

    Shlomi T, Cabili MN, Herrgard MJ, Palsson BÃ, Ruppin E: Network-based prediction of human tissue-specific metabolism. Nat Biotechnol. 2008, 26: 1003-1010. 10.1038/nbt.1487.

    Article  CAS  PubMed  Google Scholar 

  43. 43.

    Gowen CM, Fong SS: Genome-scale metabolic model integrated with RNAseq data to identify metabolic states of Clostridium thermocellum. Biotechnol J. 2010, 5: 759-767. 10.1002/biot.201000084.

    Article  CAS  PubMed  Google Scholar 

  44. 44.

    Orth JD, Conrad TM, Na J, Lerman JA, Nam H, Feist AM, Palsson BO: A comprehensive genome-scale reconstruction of Escherichia coli metabolism–2011. Mol Syst Biol. 2011, 7: 535-10.1038/msb.2011.65.

    PubMed Central  Article  PubMed  Google Scholar 

  45. 45.

    Markowitz VM, Chen IM, Palaniappan K, Chu K, Szeto E, Grechkin Y, Ratner A, Jacob B, Huang J, Williams P, Huntemann M, Anderson I, Mavromatis K, Ivanova NN, Kyrpides NC: IMG: the Integrated Microbial Genomes database and comparative analysis system. Nucleic Acids Res. 2012, 40: D115-D122. 10.1093/nar/gkr1044.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  46. 46.

    Hyduke DR, Lewis NE, Palsson BO: Analysis of omics data with genome-scale models of metabolism. Mol Biosyst. 2013, 9: 167-174. 10.1039/c2mb25453k.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

  47. 47.

    Dwivedi RC, Spicer V, Harder M, Antonovici M, Ens W, Standing KG, Wilkins JA, Krokhin OV: Practical implementation of 2D HPLC scheme with accurate peptide retention prediction in both dimensions for high-throughput bottom-up proteomics. Anal Chem. 2008, 15;80 (18): 7036-42. 10.1021/ac800984n.

    Article  Google Scholar 

  48. 48.

    McQueen P, Krokhin O: Optimal selection of 2D reversed-phase-reversed-phase HPLC separation techniques in bottom-up proteomics. Expert Rev Proteomics. 2012, 9 (2): 125-8. 10.1586/epr.12.8.

    Article  CAS  PubMed  Google Scholar 

  49. 49.

    Craig R, Beavis RC: TANDEM: matching proteins with tandem mass spectra. Bioinformatics. 2004, 12;20 (9): 1466-7. 10.1093/bioinformatics/bth092.

    Article  Google Scholar 

  50. 50.

    Feist AM, Herrgard MJ, Thiele I, Reed JL, Palsson BO: Reconstruction of biochemical networks in microorganisms. Nat Rev Microbiol. 2009, 7: 129-143. 10.1038/nrmicro1949.

    PubMed Central  Article  CAS  PubMed  Google Scholar 

Download references


This work was partially supported by Genome Canada (MGCB2 project). The funding agency was not involved in any aspect of the study (design, execution, writing, publication submission).

Author information



Corresponding author

Correspondence to Stephen S Fong.

Additional information

Competing interests

The authors declare that they have no competing interests.

Authors’ contributions

NV constructed, analyzed and compared the three versions of model. NV and JPB ran the model simulation using MetModel the scripts. NV, VS, DS, OK and JAW worked on proteomics experiments to generate, pre-process and analyze proteomics data. NV integrated the experimental dataset with the model and completed model validation with the programming support from JPB. YD worked on growth curve experimental analysis, biomass equation and first draft of the version one of model. SSF conceived of the study. All authors read and approved the final manuscript.

Electronic supplementary material


Additional file 1:Three_Versions_of_Model.xlxs. xlxs file with three spreadsheets illustrative the reaction flux in three version of the model. (XLSX 297 KB)


Additional file 2:Biomass Equation Compound Identifiers.xlxs. xlxs file with the list of reactants and products on the biomass equation and their description from Kegg database. (XLSX 30 KB)

Authors’ original submitted files for images

Rights and permissions

Open Access  This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made.

The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

To view a copy of this licence, visit

The Creative Commons Public Domain Dedication waiver ( applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Vanee, N., Brooks, J.P., Spicer, V. et al. Proteomics-based metabolic modeling and characterization of the cellulolytic bacterium Thermobifida fusca . BMC Syst Biol 8, 86 (2014).

Download citation


  • Metabolic Modeling
  • Flux Balance Analysis
  • Constraint Based Modeling
  • Actinomycete
  • Thermobifida fusca
  • Proteomics Profiling
  • Terpenoids Biosynthesis Pathway
  • DXP Pathway
  • Mevalonate Pathway
  • Biofuel