 Research article
 Open Access
 Published:
An efficient algorithm for identifying primary phenotype attractors of a largescale Boolean network
BMC Systems Biology volume 10, Article number: 95 (2016)
Abstract
Background
Boolean network modeling has been widely used to model largescale biomolecular regulatory networks as it can describe the essential dynamical characteristics of complicated networks in a relatively simple way. When we analyze such Boolean network models, we often need to find out attractor states to investigate the converging state features that represent particular cell phenotypes. This is, however, very difficult (often impossible) for a large network due to computational complexity.
Results
There have been some attempts to resolve this problem by partitioning the original network into smaller subnetworks and reconstructing the attractor states by integrating the local attractors obtained from each subnetwork. But, in many cases, the partitioned subnetworks are still too large and such an approach is no longer useful. So, we have investigated the fundamental reason underlying this problem and proposed a novel efficient way of hierarchically partitioning a given large network into smaller subnetworks by focusing on some attractors corresponding to a particular phenotype of interest instead of considering all attractors at the same time. Using the definition of attractors, we can have a simplified update rule with fixed state values for some nodes. The resulting subnetworks were small enough to find out the corresponding local attractors which can be integrated for reconstruction of the global attractor states of the original large network.
Conclusions
The proposed approach can substantially extend the current limit of Boolean network modeling for converging state analysis of biological networks.
Background
In the realm of systems biology, mathematical modeling is essential to unravel the hidden principles underlying complex biological phenomena [1]. Among various mathematical modeling frameworks, the Boolean network is particularly useful for modeling largescale biomolecular regulatory networks as it is a parameterfree logical model and thereby we can avoid parameter estimation which is often a critical limitation in mathematical modeling of such largescale networks [2–5]. Once a Boolean network model is obtained, the converging state characteristics of the modeled network can be investigated by identifying attractor states which were known corresponding to cell phenotypes [6–11]. Finding attractors of interest is, however, an NPhard problem [12–14] since we have to search the full state space and this is only possible for small networks with less than about 20 nodes [15, 16].
To tackle such a problem, there have been several attempts to reduce the original Boolean network model by eliminating some nodes or logically simplifying Boolean functions [17–27], or focusing only on point attractors [28, 29]. Another attempt was partitioning the original large Boolean network into smaller blocks and reconstructing the original attractors by integrating the local attractors of partitioned blocks [30, 31]. However, none of these could resolve the fundamental problem of computational complexity since both the reduced network and the partitioned subnetwork are still too large in most cases of biological networks. Even if the reduced network is small enough to search the full state space, the resulting attractor states of the reduced network can be different from the attractor states of the original network (this will be shown in the Results section). The existing partitioning approaches retain the complicated logic of the original network even after partitioning such that the whole set of attractors can still be found from the partitioned subnetworks. We found that the fundamental limitation of the previous partitioning methods lies in this point. To overcome such a limitation, we propose a different approach in this paper. The main idea is focusing only on particular phenotypic attractors of interest and simplifying the Boolean update rules of the original network by introducing some constraint equations such that the particular attractors are not affected. In this way, we can efficiently reduce the original large network. Then, we further partition the reduced network hierarchically and find out the local attractors of each partitioned subnetwork. We can finally obtain the global attractors for representing the particular phenotype in the original network by sequentially concatenating the local attractors. Our approach is based on the previous concept of strongly connected component (SCC) [30, 31], but the main difference is that our approach can efficiently find out the particular phenotypic attractors of interest by hierarchically partitioning the reduced network obtained by simplifying the state update rules using some constraint equations, whereas the previous approach attempts to partition the original network while retaining all the complicated state update rules and thereby results in still a large subnetwork even after partitioning.
We validated the usefulness of our approach by applying it to several large and complicated biological Boolean network models.
Methods
In this section, we describe the procedure of finding global attractors for the phenotype of interest from a large and strongly connected network and explain how to hierarchically partition the network into smallersize subnetworks. We then describe a way of constructing the global attractors by sequential concatenation of local attractors of the subnetworks.
Procedure for construction of global attractors by concatenating local attractors
Let us consider that a large and complicated synchronous Boolean network is given and the states of nodes in the network are updated by logic functions or threshold (sign) functions. Our goal is to find attractors for a phenotype of interest (for example, apoptosis or proliferation) in the given network. The idea is to transform the original update rules into simplified update rules by fixing the state values of some nodes (Steps 1 and 2) and to convert the original network into a simplified network using the simplified update rules. After hierarchically partitioning the simplified network into their SCCs (Step 3), the local attractors of each SCC can be found by using a full search algorithm (Step 4). Finally, we can find the global attractors by concatenating the local attractors (Step 5). Each step of the procedure is as follows:

Step 11. Determine the fixed state values of nodes for external environment. The environment is a stimulus, a tumourpromoting microenvironment or perturbation of a node as in [6, 9, 10]. Nodes for representing the environment are referred to as “external nodes”.

Step 12. Insert the fixed values of the external nodes into the system of update equations. Applying Step12, we can obtain the fixed state values of some nodes, which are different from the external nodes and referred to as “secondaryexternal nodes”. As a result, the original update rules are divided into two parts. The first is the set of external and secondaryexternal nodes (ESENs) with their fixed values. The other is the new update rules for those nodes except ESENs, which are called as “the semisimplified update rules”. We refer to the two parts as “the external condition” (Fig. 1 STEP1). Examples for Step 1 are given in S.Example 1 in Additional file 1 (see Additional files 2(c), 3(b), 4(c), 5(b) and 6(c) for details).

Step 21. Determine the nodes and their fixed state values for the definition of the phenotype. We consider networks with a node that is the phenotype as in [6, 9, 10]. For instance, in case that the network has the state update rule, Proliferation* = p70 & MYC & !p21, the network is said to have the node for proliferation, where the symbols * and (&,!) denote the next time step and the logic operators (and, or), respectively. Consistent activation of the phenotype is defined by both nodes and their fixed state values, which are referred to as “phenotype nodes and values”. For the update rule, Proliferation* = p70 & MYC & !p21, the phenotype nodes are (p70, MYC, p21) with fixed values (1,1,0). Therefore the desired global attractor states for the proliferation phenotype must satisfy the constraints (p70, MYC, p21) = (1,1,0). The step is described in detail in Additional file 1.

Step 22. Insert the fixed values of the phenotype nodes into the semisimplified update rules. After applying Step 22, we can obtain the fixed state values of some nodes, which are neither ESENs nor phenotype nodes and referred to as “secondaryphenotype nodes”. Consequently, the semisimplified update equations are divided into three parts. The first is the set of phenotype and secondaryphenotype nodes (PSPNs) with their fixed values. The second is constraint equations, which are introduced due to the constraints in Step 21 and explained in S.Example 3 in Additional file 1. The third is the new update rules for nodes except both ESENs and PSPNs, which are called as “the fullysimplified update rules”. The three parts are referred to as “the phenotype condition” (Fig. 1 STEP2). Examples for Step 2 are given in Additional files 2(d), 3(c), 4(d), 5(c) and 6(d). Note that if update rules are defined by threshold (sign) functions, then constraint equations are changed to constraint inequalities as in the SCP network of the Result section and S.Remark 1 of Additional file 1.

Step 3. Construct the hierarchical partition of the network corresponding to the fullysimplified update rules. Note that this partition is for nodes except both ESENs and PSPNs not for all nodes in the original network. The partition is referred to as “the hierarchical partition for the phenotype (HPFP)” as in Fig. 1 STEP3 and this step is explained in the Construction of HPFP section below. Examples for Step 3 are shown in Fig. 2 and the Result section.

Step 41. Find the local attractors of subnetworks in the HPFP.

Step 42. Construct the global attractors of the HPFP (Fig. 1 STEP4) by sequential concatenation of the local attractors satisfying the secondaryphenotype equations. Step 4 is explained in detail in the section of ‘How to concatenate the local attractors of subnetworks?’ and Additional files 7 and 8.

Step 5. Combine the global attractors of the HPFP with fixed values of ESENs and PSPNs as shown in STEP5 of Fig. 1. After applying Step 5, we can obtain all the desired phenotype attractors of the original network. Examples for such phenotype attractors are given in Additional files 2(g), 3(f), 4(f)(g), 5(f)(m) and 6(e).
Construction of HPFP
Let us explain how to construct the HPFP introduced in Step 3 above. The layers of the HPFP are referred to as categories. The first category consists of SCCs with zero indegree as the SCC V _{1,1} in Fig. 2. The nth category (n ≥ 2) consists of SCCs satisfying two conditions: every link into SCCs in the nth category comes from nodes in the kth categories (1 ≤ k ≤ n − 1) and SCCs in the nth category have at least one input link coming from nodes in the (n1)th category. The HPFP is defined as the union of the hierarchical categories, each of which is also partitioned by SCCs. The HPFP has a simpler structure than the partition of the original network as the HPFP is not a partition of the original network but of the network simplified by the fullysimplified update rules.
For instance, let us assume that there exists a Boolean network in Fig. 2a, which has five SCCs in Fig. 2b. Applying the methods in [30, 31], the Boolean network is partitioned as in Fig. 2c. The goal of the partition in [30, 31] is to make a framework for finding all attractors of the original network without fixing a particular phenotype. However, we are interested in construction of other partition (HPFP) for finding particular attractors which represent a phenotype of interest. For simplicity, we assume that there exist no external, secondaryexternal and secondaryphenotype nodes. In addition, we assume that x _{1} is a phenotype with the update equation
and that the phenotype nodes are (x _{2}, x _{3}) with one secondaryphenotype equation
0 = x _{3} = f _{2}(x _{5}, x _{7}).
Hence, the nodes x _{ i }(1 ≤ i ≤ 3) and the links connected to x _{ i }(1 ≤ i ≤ 3) are removed from Fig. 2c, thus changing Fig. 2c into Fig. 2d. Therefore, the first category of the HPFP in Fig. 2d comprises V _{1,1} = {x _{6}, x _{7}, x _{8}, x _{9}} and V _{1,2} = {x _{4}}, which have a zero indegree. The SCCs V _{2,1} = {x _{10}, x _{11}} and V _{2,2} = {x _{5}} in the second category are the unique SCCs with links connected to the nodes in the first category. Comparing the two hierarchical partitions in Fig. 2c and d, we can find that the HPFP is simpler than the partition that can be obtained from previous methods [30, 31].
How to concatenate the local attractors of subnetworks in the HPFP?
Let us explain, through an example, how to sequentially concatenate the local attractors of subnetworks in categories of the HPFP in Fig. 3a for the construction of the global attractors of the HPFP. The algorithm for the concatenation is described in detail in Additional file 8. Our explanation is focused on concatenation from the HPFP, so that we do not take into account the external, phenotype, secondaryexternal and secondaryphenotype nodes, and secondaryphenotype equations. However, when applying our approach to biological networks in the Results section, these were taken into account. The HPFP is given with the fullysimplified update rules in Additional file 7(a). In the following, we describe the sequential concatenation step by step (the details of calculation in each step are given in Additional file 7).
Step 1. Find local attractors in the first category. There exists only one subnetwork V _{1,1} = {x _{1}, x _{2}} in the first category as it is the unique subnetwork with no input links. Then V _{1,1} has the update rules defined by x _{1} and x _{2} in Additional file 7(a), which yield three local attractors a_{〈1〉} = 〚10, 01〛, a_{〈2〉} = 〚00〛, a_{〈3〉} = 〚11〛 in Additional file 7(b). Here the symbol 〚10, 01〛 denotes a cyclic attractor of length 2 and 〚00〛 a point attractor in Fig. 3b. In the next, we find global attractors containing the cyclic states a_{〈1〉} for x _{1} and x _{2}. Similarly, the process for obtaining global attractors that include a_{〈2〉} and a_{〈3〉} is presented in detail in Additional file 8.
Step 2. Find local attractors in the second category. There exist two subnetworks V _{2,1} = {x _{3}, x _{4}} and V _{2,2} = {x _{5}, x _{6}, x _{7}} in the second category with input signals from the first category.
Step 21. Find local attractors of V _{2,1}. Due to V ^{in}_{2,1} = {x _{1}}, the subnetwork V _{2,1} = {x _{3}, x _{4}} gets the input signal 〚1, 0〛 generated from the state values of x _{1} in the attractor a_{〈1〉}. Note that change of the starting value of the input signal while preserving the order (1 and 0 with period 2) cannot affect the local attractors, which is proved in S.Theorem 1 in Additional file 8. Then we have a unique local attractor of V ^{in}_{2,1} ∪ V _{2,1} = {x _{1}, x _{3}, x _{4}}, which is 〚101, 000, 100, 010〛 in Fig. 3c and Additional file 7(c). Therefore, the local attractor of V _{2,1} = {x _{3}, x _{4}} becomes 〚01, 00, 00, 10〛 in Fig. 3g.
Step 22. Find local attractors of V _{2,2}. As in Step 21, using the update rules for V _{2,2} = {x _{5}, x _{6}, x _{7}} with the input signal 〚0, 1〛 generated from V ^{in}_{2,2} = {x _{2}}, we have a unique local attractor of V ^{in}_{2,2} ∪ V _{2,2}, which is 〚0000, 1010, 0101, 1000, 0001, 1001〛 in Fig. 3d and Additional file 7(d). Therefore the local attractor of V _{2,2} = {x _{5}, x _{6}, x _{7}} becomes 〚000, 010, 101, 000, 001, 001〛 in Fig. 3g.
Step 3. Find local attractors in the last category. There exist two subnetworks V _{3,1} = {x _{8}, x _{9}} and V _{3,2} = {x _{10}, x _{11}} in the last category with input signals from the first and second categories.
Step 31. Find local attractors of V _{3,1}. Using the update rules for V _{3,1} = {x _{8}, x _{9}} with the input signal 〚100, 001, 100, 010, 100, 000, 100, 011, 100, 000, 100, 010〛 from V ^{in}_{3,1} = {x _{1}, x _{3}, x _{6}}, we have a unique attractor of V ^{in}_{3,1} ∪ V _{3,1}, which is cyclic with length 12
in Fig. 3e and Additional file 7(e). Therefore the local attractor of V _{3,1} = {x _{8}, x _{9}} becomes 〚00〛 in Fig. 3g.
Step 32. Local attractors of V _{3,2}. Using the update rules for V _{3,2} = {x _{10}, x _{11}} with the input signal 〚0, 0, 1, 0, 1, 1〛 from V ^{in}_{3,2} = {x _{7}}, we have a unique attractor of V ^{in}_{3,2} ∪ V _{3,2}, which is 〚000, 000, 100, 000, 100, 100〛 in Fig. 3f and Additional file 7(f). Therefore the local attractor of V _{3,2} = {x _{10}, x _{11}} becomes 〚00〛 in Fig. 3g and Additional file 7(f).
Step 4. Construct the table with all the local attractors obtained from a_{〈1〉}. We construct the table in Fig. 3g, in which the first column denotes the order of states of each local attractor in the second column to the sixth column. The second column denotes the local attractor 〚10, 01〛 of V _{1,1} = {x _{1}, x _{2}}. Even though there are no states in the cells of the second column from the order 3, the second column is considered to be filled with states 10 and 01 with a period of 2. For instance, the states in the 3rd and 4th cells are 10 and 01, respectively. Similarly, the third column is filled with states 01, 00, 00 and 10 with a period of 4. Repeating this process completes the table.
Step 5. Construct the global attractor from the table. The concatenation of states in the ith row of the table becomes the ith state of the global attractor of the HPFP. Therefore, concatenating states from cells of the table in a row yields the unique global attractor of the HPFP with a period of 12, where the period is the least common multiple of periods of the five local attractors: 2, 4, 6, 1 and 1.
Finally, we obtain the unique global attractor by sequentially concatenating the local attractors that include the local attractor a_{〈1〉} in Fig. 3h and Additional file 7(g), and confirm that the concatenated states become the global attractor by applying the original update rules in Additional file 7(g).
Results
To demonstrate the effectiveness of our framework in practice, we applied our method to three biological network models for finding attractors responsible for proliferation or apoptosis phenotypes: the first was a Mitogenactivated protein kinase (MAPK) model [6] with 53 nodes and 88 links, the second was a colitisassociated colon cancer (CACC) model [10] with 70 nodes and 152 links and the last was the simplified cancer pathways (SCP) model [9] with 96 nodes and 265 links. In general, Boolean update rules are classified into two types: one is defined with logic functions and the other with threshold functions. The MAPK and CACC networks have update rules that correspond to the first type. The SCP network has update rules corresponding to the second type.
MAPK network
The MAPK model has four stimuli (DNA damage, TGFBR stimulus, EGFR stimulus and FGFR3 stimulus) and three phenotypes (proliferation, apoptosis and growth arrest) as in Fig. 4. The cascades in the MAPK network are strongly interconnected and the maximum number of nodes of the SCCs in the network is 37(69.8 %) as shown in Additional files 2(a) and (b). Therefore, due to computational complexity, the previous methods [30, 31] based on SCCs is not useful for this MAPK network.
Proliferation attractors of the MAPK network
In order to find global attractors for proliferation of the MAPK network, we used the same simulation condition r30 in S3 Dataset of [6]: ERK perturbation with setting the values of the four stimuli to zero. Inserting the fixed values (ERK, TGFBR stimulus, EGFR stimulus, FGFR3 stimulus, DNA damage) = (1,0,0,0,0) of the external nodes into the update rules for the MAPK network in Additional file 2(a), we found the external condition: the external, secondaryexternal nodes (ESENs) and the semisimplified update rules for nodes except ESENs in Additional file 2(c). Due to the update rule, Proliferation* = p70 & MYC & !p21, inserting the phenotype values (p70, MYC, p21) = (1,1,0) of the phenotype nodes into the semisimplified update rules, we found the phenotype condition: the phenotype and secondaryphenotype nodes (PSPNs), the fullysimplified update rules for 21 nodes and the two secondaryphenotype equations
in Additional file 2(d). The fullysimplified update rules yield the HPFP for proliferation in Fig. 5 where the HPFP has 8 categories and the SCCs has four nodes at most whereas the SCC in the original network has 37 nodes. The yellow boxes on the three nodes p53, MAX, AKT in Fig. 5 denote the nodes included in the two secondaryphenotype equations, where the three nodes are referred to as “the equation nodes”.
The SCCs with more than one node in the HPFP are V _{1,1} = {GRB2, PKC, EGFR, PLCG} and V _{4,1} = {p38, p53, GADD45, MTK1}. The fullysimplified update rules for (GRB2, PKC, EGFR, PLCG) yield that V _{1,1} has the unique attractor 〚0100, 0000, 0010, 1011, 1101〛 in Additional file 2(e), where the computing time was 0.028871 s by using a PC with 3.6GHz CPU and 32G RAM. The signal coming from {PLCG} in V _{1,1} is transmitted to V _{2,1} = {RAS} with the formula RAS* = PLCG and the signal from {RAS} becomes the input signal to V _{3,1} = {MAP3K1_3} with MAP3K1_3* = RAS. As a result, V _{3,1} has a unique attractor 〚1, 1, 0, 0, 0〛. The unique input signal from {MAP3K1_2} to V _{4,1} yields a unique attractor of V _{4,1}, which is the point attractor 〚0000〛 for (p38, p53, GADD45, MTK1) in Additional file 2(f). In this case, the computing time was 0.108352 s. Inserting the state values of the point attractor into the fullysimplified update rules in Additional file 2(d), we have
and then
Hence the secondaryphenotype equations were satisfied for the local attractors of the seven subnetworks
V _{ i,1}(1 ≤ i ≤ 4), V _{5,1} = {PTEN}, V _{5,3} = {MAX}, V _{6,1} = {AKT}.
Note that the remaining eight subnetworks in Fig. 5 do not affect the states of the equation nodes (p53, MAX, AKT). Therefore, we can construct the table in Fig. 3g and found a unique global attractor for proliferation, which is cyclic with a period of 5 in Additional file 2(g). We confirmed that the set of cyclic states becomes a global attractor of the original network by applying the original update rules in Additional file 2(g).
Apoptosis attractors of the MAPK network
To find global attractors for apoptosis phenotype in the MAPK network, we used the simulation condition r4 in S3 Dataset of [6], which is FGFR3 perturbation with setting the values of the four stimuli to zero. The fullysimplified update rules yield the HPFP for apoptosis in Fig. 6, where the HPFP has 4 categories and each SCC has two nodes at most. We obtained a unique global attractor for apoptosis, which is cyclic with a period of 4 in Additional files 3 and 9.
CACC network
The CACC model has one input (APC) and two phenotypes (proliferation and apoptosis) as in Fig. 7. The CACC network model is strongly interconnected with the maximum number of nodes of the SCC in the network is 65 (92.9 %) as described in Additional file 4(a) and (b).
Proliferation attractors of the CACC network
Under the strong tumourpromoting microenvironment (fixing DC at ON) for premalignant intestinal epithelial cells (fixing APC at ON) as in [10], we applied the proposed method to find global attractors for proliferation in the CACC network with the update rules in Additional file 4(a). Inserting the external values (DC, APC) = (1,1) of the external nodes into the CACC update rules in Additional file 4(a), we found the external condition: the external and secondaryexternal nodes (ESENs) and the semisimplified update rules for nodes except ESENs in Additional file 4(c). Due to Proliferation* = (FOS & CYCLIND1) & !(P21  CASP3) with the secondaryexternal value FOS = 1, inserting the values (CYCLIND1, P21, CASP3) = (1,0,0) into the semisimplified update rules, we found the phenotype condition: the phenotype, secondaryphenotype nodes (PSPNs), the fullysimplified update rules for three nodes (SOCS, STAT3, JAK) and no secondaryphenotype equation in Additional file 4(d). The fullysimplified update rules yield the HPFP for proliferation in Fig. 8 and the HPFP has one category with one SCC V _{1,1}, which has three nodes. The fullysimplified update rules for the three nodes (SOCS, STAT3, JAK) yield that V _{1,1} has two attractors
in Additional file 4(e). Therefore we found two global attractors for proliferation in Additional file 4(f) and (g), which are confirmed by applying the CACC update rules in Additional file 4(f) and (g).
Apoptosis attractors of the CACC network
Under the same condition for proliferation attractors of the CACC network above, the fullysimplified update rules yield the HPFP for apoptosis in Fig. 9. We applied our method to the CACC network and found that there exists no global attractor for apoptosis in the CACC network in Additional files 5 and 10. Since the simulation condition (DC, APC) = (1,1) denotes the strong tumourpromoting microenvironment (fixing DC at ON) for premalignant intestinal epithelial cells (fixing APC at ON), the nonexistence of global attractors for apoptosis can be expected.
SCP network
The simplified cancer pathway model has six inputs (Mutagen, GFs, Nutrients, TNfa, Hypoxia and Gli) and one phenotype (apoptosis) as shown in Fig. 10. The cascades in the original network are strongly interconnected with the maximum number of nodes of the SCC is 68 (70.8 %) as described in Additional file 6(a) and (b). The state vector (Mutagen, GFs, Nutrients, TNfa, Hypoxia) = (0,0,1,0,1) describes the normoxic microenvironment with the plenty of nutrients and growth factors [9].
We considered the apoptosis phenotype under the same microenvironment in [9]. Inserting the external values (Mutagen, GFs, Nutrients, TNfa, Hypoxia, Gli) = (0,0,1,0,1,0) into the SCP update rules in Additional file 6(a), we found the external condition: the external, secondaryexternal nodes (ESENs) and the semisimplified update rules for nodes except ESENs in Additional file 6(c). The secondaryexternal value Caspase8 = 0 yields
Note that Apoptosis =1 if and only if Caspase9 = 1, which is also equivalent to (Caspase9, Cytoc/APAF1) = (1,1) and the constraint inequality 0 < AKT + p53BCL_2Bcl_XL since Caspase9* = Cytoc/APAF1 and Cytoc/APAF1* = sgn(AKT + p53BCL_2Bcl_XL). As a result of the external condition, the set of ESENs satisfies the constraint inequality and becomes the set of all nodes in the SCP network in Additional file 6(c). Then there are no PSPNs, no secondaryphenotype inequalities and no fullysimplified update rules.
Therefore the vector of the fixed values of the 96 nodes (ESENs) is the unique attractor for apoptosis under the microenvironment. We confirmed that the concatenated state vector becomes the global attractor by applying the SCP update rules to Additional file 6(e).
Resolving the two problems: large size and strong interconnection
We summarized in Table 1 the aforementioned results obtained for the MAPK, CACC and SCP networks. The three biological networks have a large number of nodes that are strongly interconnected. The first two networks have nodes for representing proliferation and apoptosis phenotypes, but the last has a node for only apoptosis.
The column with the title #External and phenotype nodes in Table 1 shows that the number of nodes for a given external environment and a phenotype of interest are independent of the size and degree of interconnection. We found that the number of SCCs in the HPFP is approximately proportional to the number of categories as the number of categories gets increased. Even if the original networks are strongly interconnected and the number of categories and that of SCCs in the HPFP are high, the number of nodes in SCCs in the HPFP is small enough such that full search of the state space can be performed to find local attractors and therefore we can find global attractors for the phenotype in the original networks by concatenating the local attractors.
In particular, in the case of the SCP network, the set of ESENs becomes the set of all the 97 nodes in the SCP network with no secondaryphenotype inequalities, which explains why the number of categories, that of SCCs and the maximum are all zero in Table 1. The SCP network does not include a node for proliferation, thus we could not find attractors for proliferation phenotype.
Comparison of our method with the reduction and random sampling methods
Previous methods based on SCCs for finding all global attractors cannot be applied to the three networks in Table 1 due to the large size of networks. To deal with such a problem, two methods are usually used: reduction method and random sampling method, which were compared with our method for the MAPK, CACC and SCP networks.
Under the condition r30 in S3 Dataset of [6] used in the Proliferation attractors of the MAPK network section, the reduction method yields two attractors for proliferation phenotype, which are cyclic with a period of 6 in S3 Dataset of [6]. However, we found that the MAPK update rules under the same condition result in the unique attractor for proliferation, which is cyclic with a period of 5 in Additional file 2(g). Such different results show that the reduced network obtained by the reduction method does not preserve the attractors of the original network, even though the periodic property of attractors is preserved. In addition, under the condition r4 in S3 Dataset of [6], such difference was also found between S3 Dataset of [6] and Additional file 3(f).
Reduced update rules are given for a reduced CACC network in [10] and we used the update rules to find attractors for proliferation of the reduced CACC network in Additional file 11. We compared the proliferation attractors obtained by the reduced update rules with the proliferation attractors obtained from the original CACC network by using the proposed method. As a result, we did not find such a difference between S3 Dataset of [6] and Additional file 3(f). However, the reduced method has a disadvantage that the attractors obtained by reduced update rules for reduced networks do not have the information on states of all nodes in the original networks.
Under the condition (Mutagen, GFs, Nutrients, TNfa, Hypoxia) = (0,0,1,0,1) in S1 Dataset of [9], the random sampling method and our method yield a unique attractor for apoptosis phenotype, which is a fixed point attractor in S1 Dataset of [9] and Additional file 6(e). Even though a random sampling method (i.e. randomly sampling the initial states and tracing the converging state trajectories) can provide an estimate of global attractors of largesize networks while compromising the computational complexity, such an approximation cannot guarantee to find all global attractors for a phenotype of interest. However, our method can always guarantee the full search result even for a large network.
Validation of the proposed algorithm
To show that all attractors in a given network can be found by applying our method, we applied our method to two Boolean networks with known attractors. The first network is shown in Fig. 3a and it has 11 nodes with the update rules in Additional file 7(a), where the network has neither input nor output nodes. This network is suitable for the validation of concatenating local attractors obtained from HPFP without considering ESENs and PSPNs. By applying a full search algorithm to this network, we could find all attractors and, as a result, we confirmed that these attractors are exactly the same as we found by applying our method (see Additional file 12 for details).
For the validation of PSPNs as well as the concatenation, the second network is adopted from [10] and it has 21 nodes. This network has two cyclic attractors of length 2 and 6, both representing cell proliferation, as shown in Fig. 3c and Supplementary Table S6 in [10]. To find out all attractors representing cell proliferation in this network model, we have applied our method to this network and could obtain the same attractors (see Additional file 12 for details), as shown in Fig. 3c and Supplementary Table S6 in [10].
Discussion
Previous approaches of partitioning a large Boolean network model to resolve the computational complexity issue preserve the regulatory links of the original network to identify all the attractor states from the partitioned network. The primary point we noticed is that we have to simplify the state update rules and reduce the regulatory links to obtain small subnetworks of practically computable size. For this purpose, we focused only on a set of attractors for a particular phenotype of interest and developed a novel algorithm that can efficiently find out the attractor states from the hierarchically partitioned subnetworks obtained by simplifying the state update rules and replacing some regulatory links with constraint equations while preserving the particular attractor states. In contrast with the previous approaches, the proposed approach can result in small and simplified subnetworks of computable size. An important point is that we can always find out all the attractors corresponding to the phenotype of interest in the original large network by sequentially concatenating the local attractors that are obtained from the hierarchically partitioned subnetworks.
The limitation of our approach is that we cannot find out all attractors at the same time using this approach. However, in many practical case studies, only a few particular phenotypes are of interest and therefore, by applying the proposed approach to each particular phenotype, we can find out all attractor states of interest. Another limitation is that our approach is based on synchronous update rules, so it is currently not applicable to the Boolean network models based on asynchronous update rules. This remains as a future study.
From the case studies where we applied our approach to the three large biological network examples as well as small and medium size networks (Additional files 12 and 13), we found that the resulting subnetworks (i.e. SCCs) are composed of seven nodes at most. Of course, we cannot guarantee such a small size subnetwork in all cases, but we can always obtain much smaller subnetworks compared to previous approaches since our approach simplifies the state update rules in a practical way. Moreover, we can further reduce the subnetwork size if any other biological information on the molecular state of a node in the converging phenotypic feature is available. As there are many other biological networks that are different from the networks employed in this study, it remains as a future study to further investigate the power of our method by using extensive simulationbased analysis of synthetic networks with respect to various topological properties such as different size, level of interconnections, etc.
When we hierarchically partition a network, we simplify the state update rules by considering the fixed state values of marker nodes in the attractor states. As a result, the state space after the hierarchical partitioning becomes a subset of the state space of the original network. So, we cannot measure the basin of attraction to the particular phenotype of the original network in our framework. However, some modification of our framework might be able to resolve the problem. This also remains as a future study.
Conclusions
Although Boolean network modeling is becoming popular in modeling largescale biological regulatory networks, looking for attractors for converging state analysis is still challenging for large networks due to computational complexity. There have been some attempts to resolve this problem by partitioning the large network into smaller subnetworks and reconstructing the global attractors by concatenating the local attractors obtained from each subnetwork, but the resultant subnetworks were still too large in most cases and therefore not much useful in practice. So, in this study, we have developed a novel approach of identifying a set of global attractors for a particular phenotype of interest by hierarchically partitioning the original large network such that the resulting subnetworks are small enough to guarantee that the full search of the local attractors of them is possible. We have applied the proposed method to several biological networks and confirmed its usefulness.
Throughout the hierarchical partitioning, we can obtain the hierarchical partitioned structure of the original network with the fixed state values of some nodes. Such structural information on the network might be also useful in identifying certain target nodes to control the phenotypic behavior of a biological network. For instance, we can use this information to find out control target nodes, the perturbation of which results in preventing the convergence of the dynamical network state to the particular attractor state of interest. This is an important subject for a future study.
Abbreviations
 CACC:

Colitisassociated colon cancer
 ESENS:

External and secondaryexternal nodes
 HPFP:

The hierarchical partition for the phenotype
 MAPK:

Mitogenactivated protein kinase
 PSPNs:

Phenotype and secondaryphenotype nodes
 SCC:

Strongly connected component
 SCP:

Simplified cancer pathways
References
 1.
De Jong H. Modeling and simulation of genetic regulatory systems: a literature review. J Comput Biol. 2002;9(1):67–103.
 2.
Kauffman SA. Metabolic stability and epigenesis in randomly constructed genetic nets. J Theor Biol. 1969;22(3):437–67.
 3.
Kauffman S. Homeostasis and differentiation in random genetic control networks. Nature. 1969;224:177–8.
 4.
Glass L, Kauffman SA. The logical analysis of continuous, nonlinear biochemical control networks. J Theor Biol. 1973;39(1):103–29.
 5.
Wang R, Saadatpour A, Albert R. Boolean modeling in systems biology: an overview of methodology and applications. Phys Biol. 2012;9(5):055001.
 6.
Grieco L, Calzone L, BernardPierrot I, Radvanyi F, KahnPerles B, Thieffry D. Integrative modelling of the influence of MAPK network on cancer cell fate decision. PLoS Comput Biol. 2013;9(10):e1003286.
 7.
Hanahan D, Weinberg RA. The hallmarks of cancer. Cell. 2000;100(1):57–70.
 8.
Smith G, Carey FA, Beattie J, Wilkie MJ, Lightfoot TJ, Coxhead J, Garner RC, Steele RJ, Wolf CR. Mutations in APC, Kirstenras, and p53alternative genetic pathways to colorectal cancer. Proc Natl Acad Sci U S A. 2002;99(14):9433–8.
 9.
Fumiã HF, Martins ML. Boolean network model for cancer pathways: predicting carcinogenesis and targeted therapy outcomes. PLoS One. 2013;8(7):e69008.
 10.
Lu J, Zeng H, Liang Z, Chen L, Zhang L, Zhang H, Liu H, Jiang H, Shen B, Huang M, Geng M, Spiegel S, Luo C. Network modelling reveals the mechanism underlying colitisassociated colon cancer and identifies novel combinatorial anticancer targets. Sci Rep. 2015;5:14739.
 11.
Li Q, Wennborg A, Aurell E, Dekel E, Zou JZ, Xu Y, Huang S, Ernberg I. Dynamics inside the cancer cell attractor reveal cell heterogeneity, limits of stability, and escape. Proc Natl Acad Sci U S A. 2016;113(10):2672–7.
 12.
Akutsu T, Kuhara S, Maruyama O, Miyano S. A system for identifying genetic networks from gene expression patterns produced by gene disruptions and overexpressions. Genome Inform. 1998;9:151–60.
 13.
Zhao Q. A remark on “ Scalar equations for synchronous Boolean networks with biological Applications” by C. Farrow, J. Heidel, J. Maloney, and J. Rogers. IEEE Trans Neural Netw. 2005;16(6):1715–6.
 14.
Akutsu T, Kosub S, Melkman AA, Tamura T. Finding a periodic attractor of a Boolean network. IEEE/ACM Trans Comput Biol Bioinform. 2012;9(5):1410–21.
 15.
Berntenis N, Ebeling M. Detection of attractors of large Boolean networks via exhaustive enumeration of appropriate subspaces of the state space. BMC Bioinform. 2013;14(1):1.
 16.
Zañudo JG, Albert R. An effective network reduction approach to find the dynamical repertoire of discrete dynamic networks. Chaos. 2013;23(2):025111.
 17.
Bryant RE. Graphbased algorithms for boolean function manipulation. IEEE Trans Comput. 1986;100(8):677–91.
 18.
Bilke S, Sjunnesson F. Stability of the Kauffman model. Phys Rev E. 2001;65(1):016129.
 19.
Socolar JE, Kauffman SA. Scaling in ordered and critical random Boolean networks. Phys Rev Lett. 2003;90(6):068702.
 20.
Dubrova E, Teslenko M, Martinelli A. Kauffman networks: analysis and applications. In: Anonymous IEEE Computer Society, editor. Proceedings of the 2005 IEEE/ACM International conference on Computeraided design. 2005. p. 479–84.
 21.
Mihaljev T, Drossel B. Scaling in a general class of critical random Boolean networks. Phys Rev E. 2006;74(4):046101.
 22.
Di Cara A, Garg A, De Micheli G, Xenarios I, Mendoza L. Dynamic simulation of regulatory networks using SQUAD. BMC Bioinform. 2007;8(1):1.
 23.
Garg A, Xenarios I, Mendoza L, DeMicheli G. An efficient method for dynamic analysis of gene regulatory networks and in silico gene perturbation experiments. In: Anonymous Springer, editor. Research in computational molecular biology. 2007. p. 62–76.
 24.
Saadatpour A, Albert I, Albert R. Attractor analysis of asynchronous Boolean models of signal transduction networks. J Theor Biol. 2010;266(4):641–56.
 25.
Naldi A, Remy E, Thieffry D, Chaouiya C. Dynamically consistent reduction of logical regulatory graphs. Theor Comput Sci. 2011;412(21):2207–18.
 26.
VelizCuba A. Reduction of Boolean network models. J Theor Biol. 2011;289:167–72.
 27.
Zheng D, Yang G, Li X, Wang Z, Liu F, He L. An efficient algorithm for computing attractors of synchronous and asynchronous Boolean networks. PLoS One. 2013;8(4):e60593.
 28.
Hong C, Hwang J, Cho K, Shin I. An efficient steadystate analysis method for large boolean networks with high maximum node connectivity. PLoS One. 2015;10(12):e0145734.
 29.
VelizCuba A, Aguilar B, Hinkelmann F, Laubenbacher R. Steady state analysis of Boolean molecular network models via model reduction and computational algebra. BMC Bioinform. 2014;15(1):1.
 30.
Zhao Y, Kim J, Filippone M. Aggregation algorithm towards largescale Boolean network analysis. IEEE Trans Automatic Control. 2013;58(8):1976–85.
 31.
Guo W, Yang G, Wu W, He L, Sun M. A parallel attractor finding algorithm based on Boolean satisfiability for genetic regulatory networks. PLoS One. 2014;9(4):e94258.
Acknowledgments
We thank SangMin Park for his help in developing the programming code of finding attractors and also JeHoon Song for his help in preparing the figures.
Funding
This work was supported by the National Research Foundation of Korea (NRF) grants funded by the Korea Government, the Ministry of Science, and ICT & Future Planning (2015M3A9A7067220, 2014R1A2A1A10052404, and 2013M3A9A7046303). It was also supported by a grant of the Korean Health Technology R&D Project, Ministry of Health and Welfare, Republic of Korea (HI13C2162), the KUSTARKAIST Institute, KAIST, Korea, and the KAIST Future Systems Healthcare Project from the Ministry of Science, ICT and Future Planning.
Availability of data and materials
The data supporting the results of this article are included and cited within the article and its additional files.
Authors’ contributions
Conceived and designed the experiments: SMC and KHC. Performed the experiments: SMC Analyzed the data: SMC and KHC. Wrote the paper: SMC and KHC. Both authors read and approved the final manuscript.
Competing interests
The authors declare that they have no competing interests.
Consent for publication
Not applicable.
Ethics approval and consent to participate
Not applicable.
Author information
Affiliations
Corresponding author
Additional files
Additional file 1:
Definition of external and phenotype nodes. (PDF 211 kb)
Additional file 2:
Attractors for proliferation in the Mitogenactivated protein kinase (MAPK) model. (XLSX 60 kb)
Additional file 3:
Attractors for apoptosis in the Mitogenactivated protein kinase (MAPK) model. (XLSX 47 kb)
Additional file 4:
Attractors for proliferation in the colitisassociated colon cancer (CACC) model. (XLSX 61 kb)
Additional file 5:
Attractors for apoptosis in the colitisassociated colon cancer (CACC) model. (XLSX 107 kb)
Additional file 6:
Attractors for apoptosis in the simplified cancer pathways (SCP) model. (XLSX 53 kb)
Additional file 7:
Example of how to find the phenotype attractors in HPFP. (XLSX 73 kb)
Additional file 8:
Explanation of how to concatenate the local attractors of subnetworks in the HPFP. (PDF 1254 kb)
Additional file 9:
Attractors for apoptosis in the MAPK network. (PDF 189 kb)
Additional file 10:
Attractors for apoptosis in the CACC network. (PDF 193 kb)
Additional file 11:
Attractors for proliferation in the reduced CACC model. (XLSX 38 kb)
Additional file 12:
Validation of the proposed algorithm for two small and medium networks. (PDF 158 kb)
Additional file 13:
Attractor in the logical Tcell signaling model. (XLSX 19 kb)
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
About this article
Cite this article
Choo, SM., Cho, KH. An efficient algorithm for identifying primary phenotype attractors of a largescale Boolean network. BMC Syst Biol 10, 95 (2016). https://0doiorg.brum.beds.ac.uk/10.1186/s1291801603384
Received:
Accepted:
Published:
DOI: https://0doiorg.brum.beds.ac.uk/10.1186/s1291801603384
Keywords
 Boolean network
 Cell phenotypes
 Attractors
 Hierarchical partition
 Systems biology